This photo is an example of how metal tiles can be used to protect and beautify a kitchen.
By Frank Ross
When a customer emailed our customer service department wanting information on how to install a decorative stainless steel backsplash, Charlene jumped in quickly to help. The customer wanted to redo her cooking counter top area and did not know about installation, measuring for this product, or how to install it. However, she was not lacking in enthusiasm and that’s the first ingredient in a recipe for a good project! She liked the random swirl decorative stainless steel and wanted to add that beautiful metal on the walls surrounding the cook top.
Charlene explained that the first step in the process was to start off with some measurements. She asked for careful measurement of the width and length of the space the customer wanted to cover. She explained that when working with metal precise measurements are mandatory to ensure a first-time fit. To make it easier on the craftsmen who will be preparing the backspash and to avoid any misunderstanding, it is best to do a rough sketch of the area, include the measurements and fax or scan and email it into our production specialists.
From the sketch and measurements, Storm’s experienced staff can determine how many pieces are needed and provide you a price quote quickly and accurately. Once an order is finalize the customer should receive their product in just a couple of days.
While Storm’s staff can do any custom cutting work, it is sometimes best to make final fitting detail work on site. This is especially true when angles or unusual shapes are involved. To create the holes required for outlet receptacles or switches, you need to measure twice from opposite sides to make sure you’ve not made a mistake. Once you’re marked the area to be removed, drill a pilot hole large enough to accept the metal blade of a hand-held jig saw and make the cut. You’ll want to file the edges a bit to reduce burrs that could get in a finger or palm during installation.
Storm also offers the adhesive required to apply the backsplash, and tips on making the installation quick and easy. Metal is actually not difficult to install. Follow these simple steps.
1. Apply the adhesive to the stainless steel backsplash and position it in place.
2. Add a couple of strips of painter’s tape to hold it in place, while the adhesive sets up.
3. Let the backsplash adhesive cure for 24 hours before removing the tape and the PVC coating on the metal.
4. Stand back and admire your new backsplash and a job well done!
If you would like to add the beauty and functionality of metal to your kitchen, give the friendly customer service folks at call at 1-888-334-2177 or link up to a live chat session at QuickShipMetals.com. They’re always happy to help!
Are there any stainless steel products that come in like a 6 x 8 sheet for a seamless backsplash?
Julie, I’m not sure what you’re asking for. Do you want a sheet that’s 6′x8′, 6″x8′ or 6′x8″? If you could let me know, we’ll take it from there, but 6′x8′ is not an option. The largest size available is 4′x10′.
Frank
How many brushed stainless steel backsplash patterns/designs do you carry? And approximately how much does a piece cost. The area I want to cover is approximately 24 inches high and roughly 12 feet wide (with a window in the middle that is approximately 3 feet wide). Thank you in advance for your reply.
WE ARE CONSIDERING PURCHASING TWO SHEETS OF COPPER FOR OUR KITCHEN BACKSPLASH SURROUND. THEY WILL BE AROUND 96″ LONG EACH. IS THERE A TRICK TO MAKING THE CUTOUTS FOR THE SWITCHES/PLATES? ALSO, FOR APPEARANCE PURSPOSES HOW DO RECOMMEND HANDLING OR FINISHING THE COPPER AROUND WINDOWS? DO YOU RECOMMEND WRAPPING IT AROUND TO MEET THE CASING (I.E., LIKE HOW WALLPAPERING IS DONE). ADDITIONAL THE TWO SHEETS WOULD MEET AT A CORNER. DO YOU RECOMMEND ADDING TRIM TO BOTH ENDS AS THEY BUTT UP AGAINST ONE ANOTHER. LASTLY, OUR GRANITECOUNTERTOP WAS CUT VERY TIGHT TO THE WALL FOR THIS APPLICATION BUT IN A COUPLE AREAS THE WALL IS A LITTLE UNEVEN. SHOULD WE SIZE UP? WHAT DO YOU THINK WOULD LOOK BEST TO OBTAIN A FINISHED EDGE WHERE THE COPPER MEETS THE GRANITE COUNTER TOP. IF YOU’D LIKE, WE CAN DISCUSS FURTHER ON THE PHONE. PLEASE LET ME KNOW. THANKS. WADE HOLTON.
Hi Wade, The first thing to consider about switch plate or outlet openings is measure twice, cut once. Use a Dremel tool to make the cuts. It will look good if you wrap it around the casing and let the edges butt to each other. Finish it off with caulk. To compensate for the unevenness of the granite you’ll want to size up. You can always cut the copper with tin snips or using a belt sander to take a little off. To compensate for the unevenness butting up against the granite, I would recommend using the copper J mold or better solution would be a copper bar .062 thick x 1” or 2”. This will give you a great transition from the granite countertop to the backsplash.
Hope this helps solve the challenges you’re facing. If you have need of further explanation or need a price quote, call our toll-free number 1-888-334-2177.
Frank
Cecile, We offer 1 pattern of Brushed Stainless Steel in various thicknesses. As for the decorative we offer 8 different patterns. You can review the various patterns and finishes at this link http://www.quickshipmetals.com/decorative-sheet-metal/decorative-stainless-steel/decorative-stainless-steel.html
Prices vary for different finishes, but to give you a rough estimate in one of the decorative stainless patters it would run $ 900. When you’ve made up your mind, give us a call on our toll-free line and we’ll firm up the numbers for you. 1-888-334-2177
Frank
Frank, thanks for addressing some of our initial questions regarding our kitchen backsplash. I really like your idea of using the copper bar as a nice transition from the backsplash copper sheet to the granite instead of the J channel. This should give us more flexibility and ease of installation. I have a few additional questions based on your latest response. In previous comments you’ve made on your blog, you have indicated that Liquid Nails would work to adhere the backsplash…would we adhere the copper bar with the same stuff…or should we screw it to secure it to the wall with copper screws..if such a thing exisits? Also, we are looking at using a 32 oz. (19 gauge) for the back splash. Would this be something we could bend by hand or can we pay to have this bent onsite with Quick Ship…1″ to 1.5″ width wrap bend to meet the window casing. Of course we can provide very details measurements or even a template. Lastly, would you see a noticeable difference in rigidity/appearance (we don’t want something that will ding up easily) going from 32 oz. to say 24 or 16… surely it would be easier to bend for our corner windows we have to contend with but I don’t want to sacrifice durability. Lastly, do/can you recommend a copper switch plate company. There are a few online…didn’t know if one complimented your copper better than another. Thanks again for your time. Wade.
iam looking for a one piece 36″ long brush stainless steel cove moulding, would be nice to have both ends closed. thanks
Wade,
You’re correct, Liquid Nails would be the best option for securing the metal to the wall. As to the bends around the casings, you would be better off doing that on site during the installation. I would recommend using the 24 GA for backsplashes. It has the same thickness as a credit card and is a very common gauge for your needs as a backsplash. As for wrapping or bending, a hand break should work well for this application around the window. You might be able to rent one from a local tool rental company or one of the larger home builder’s supply stores such as Home Depot.
Sorry, we do not have any switch plates.
Good luck with your project.
Frank
Hi Wade,
You’re correct, Liquid Nails would be the best option for attaching the metal to the wall.
I would recommend using the 24 GA for backsplashes. It has the same thickness as a credit card and is a very common gauge for your needs as a backsplash. You’ll be better off doing the bends around casings on site. As for wrapping or bending, a hand break should work well for this application around the window. You should be able to rent one from a local tool rental company or a large home builder’s supply such as Home Depot.
For cutting holes to accommodate outlets or switch plates, you simply need to measure, mark and drill a pilot hole before using a hand-held jig saw with a metal blade to finish the job. To avoid errors, measure twice, cut once!
Good luck, and thanks for asking.
Frank
Sorry James,
We only carry the J molding and we do not have anything that closes on the ends. Perhaps there’s another solution. Give our customer service staff a call at 1-888-334-2177.
Frank
I’ve been looking for the best price I can find on copper coils to complete a backyard project. I have visited over 2 dozen sites and counting. Your site is just outstanding, in terms of clarity, product information, ease of use and customer support.
Occasionally you come across a company or supplier that don’t meet an industry standard, they set what should be the standard.
In my opinion your site is flawless. Congratulations!
Paul, thanks for your kind words. It is always nice to know that people are able to use the site without difficulty. I appreciate your input, and thanks for shopping QuickShipMetals.com
Frank
HI,
I was wondering, I just finished a remodel of the kitchen, and would like to add a backsplash of stainless steel just behind the stove area. I measured my stove and it’s really 31 inches wide and your sheets are 30. The same for the height I have 181/2′ and yours is 18′.
Is there a stainless steel framing border I could add all the way around the stainless steel sheet? It would give a more finished look.
I have a slide in stove with a four inch granite backsplash.
Thanks,
Christine
Hi Christine, We can custom cut that piece for you to those exact measurements. We also have a variety of trim as well.
Seems to me the best option would be to call our customer service staff and have them do a custom cut for you. 1-888-334-2177
Can you install stainless backslpash over existing ceramic tile?
Art, That’s one of those double barrel questions. With the variety of adhesive products available today, you can mount just about any object on any surface. That said, the other issue would be is it a good idea? There are two issues that would cause me to consider the options carefully. The first challenge is how are you going to deal with the transition from tile to wallboard, and I ask that assuming that the tile must be raised at least a little bit. The second issue would be the slick surface of the tile, which is not going to allow a really good bond across the entire area. While the Liquid Nails would bond to the grout areas, that’s not much surface to hang your hat on. You might be able to use a heavy grade of sandpaper and rough them up enough to get a good bond. There’s only one way to find out and the risk would be having a beautiful backsplash that comes unglued in places, making its appearance less than desirable.
I’m guessing that you want to avoid the mess of removing the tile, but taking the easy route is not always the easiest in the long run. Sometimes you have to bite the bullet! Good luck with your project, whichever way you decide to go.
Frank
We’re doing a copper backsplash, and have the copper sheeting. Sounds like Liquid Nails to the drywall is the way to go for adhering to the wall.
But, we need a trim to help transition from kitchen to dining room, and I am wondering if either the copper foil tape or copper flashing might suit. I’m also thinking that a strip of either tape or flashing would enhance the look of the seams where the copper sheeting comes together. Do you think the thickest of your foil tapes would hold up in these applications?
Sandra, you are correct; Liquid Nails is the best option for attaching copper sheeting to drywall, but you don’t want to use copper tape for the edge treatment. It would not look good, and in the long run not handle the wear and tear typically experienced with edges. We offer several options for edge molding that will give you a more professional look to your project. Here’s a handy link that will take you to the page that features those products.
Copper Trim Molding
Thanks for asking Frank
I received my back splash’s and refrigerator door inserts and every thing was perfect. The size’s were exact to my order. Job well done! I highly recommend you for quality and service. Thank You all for your friendliness, diligence and expedience in service.
Mathew in So Cal.